# locale.zh_s.properties
# Placed in the public domain 2001

# locale.properties defines the localised text for the user interface
# Some definitions are commented out because they duplicate another string
# The format of each line is original=localised, such as File=&Fichier
# Even though the original text may have ellipses "..." and access key
# indicators "&" in the user interface, these do not appear in this file
# for the original texts. Translated texts should have an access key indicator
# if needed as the translated text may not include the original access key.
# Ellipses are automatically added when needed.
# The "/" character should not be used in menu entries as on GTK+ the "/" is
# used to specifiy the menu hierarchy and so will produce extra menu items.
# Each original text may have only one translation, even if it appears in
# different parts of the user interface.

# Please state any further license conditions and copyright notices you desire.
# If there are no further notices then contributed translations will be assumed
# to be made freely available under the same conditions as SciTE.
# Email addresses included in this file may attract spam if the file is published.

# 2002/02/03 before 1.43 Translated by Chii Liao (廖啟邑)
# 2003/11/07 1.44-1.56   Translated by Daniel Lin(daniel@twpda.com)
# 2005/03/12 1.57-1.62   Translated by Edward Hsieh(edwardsayer at pchome dot com dot tw)
# 2005/09/03 1.63-1.66   Translated and corrected by 龔維正 in Taipei County.
# 2005/10/02 1.66   Translated and corrected by linnchord(高显华) in Shanghai China. 参考繁体版修改.
# 2006/04/03 1.67-1.68   Translated and corrected by Calon Xu(calon.xu@gmail.com, http://calon.weblogs.us/) in China Mianland. Based on 1.66 traditional and simplified Chinese locale.properties.
# 2007/08/21 1.69-1.74    Translated and corrected by emlvvh(emlvvh@gmail.com) in Beijing, China. Based on simplified Chinese locale.properties.
# 2010/09/03 v2.20-2.21	Translated the original locale.properties into Simplified Chinese from beginning to end by Lenny(aries0215#gmail.com). 完全由英文版重新翻译,所有菜单和对话框的“(&*)”均对应英文原版.
# 2018/08/21 v3.7.5	Translated and improved by MachineWu. 由之前的翻译增添并改进,所有菜单和对话框的“(&*)”均对应英文原版.英文版Tools的Clean命令与Compile都用(&C),改进冲突Clean用(&E)。
# 2018/08/21 v4.3.0	Translated and improved by DequanZhang. 改进一些奇怪容易误导一般用户的翻译(Buffer, Langauge)。
# Define the encoding of this file so that on GTK+ 2, the file can be
# reencoded as UTF-8 as that is the GTK+ 2 user interface encoding.
# It's recommended for translations to use UTF-8 with no BOM.
translation.encoding=UTF-8

# This is to add something like:
# Swahili translation 1.41.1 by Neil Hodgson <contact at example dot com>
TranslationCredit=翻译榜单:\n\
    Chii Liao\n\
    Daniel Lin\n\
    Edward Hsieh\n\
    Gong Weizheng\n\
    Linnchord\n\
    Calon Xu\n\
    emlvvh\n\
    Lenny(aries215)\n\
    MachineWu\n\
    DequanZhang

# Menus 菜单项

# File menu
File=文件(&F)
New=新建(&N)
Open=打开(&O)
Open Selected Filename=打开选取的文件名(&F)
Revert=恢复(&R)
Close=关闭(&C)
Save=保存(&S)
Save As=另存为(&A)
Export=导出(&E)
As HTML=为 HTML 文件(&H)
As RTF=为 RTF 文件(&R)
Page Setup=页面设置(&U)
Print=打印(&P)
Load Session=载入会话(&L)
Save Session=保存会话(&V)
Exit=退出(&X)

# Edit menu
Edit=编辑(&E)
Undo=撤销(&U)
Redo=重做(&R)
Cut=剪切(&T)
Copy=复制(&C)
Paste=粘贴(&P)
Delete=删除(&D)
Select All=全选(&A)
Copy as RTF=复制为 RTF (&F)
Match Brace=匹配括号(&B)
Select to Brace=选取到括号(&O)
Show Calltip=显示调用提示(&H)
Complete Symbol=补全符号(&Y)
Complete Word=补全单词(&W)
Expand Abbreviation=展开缩写(&V)
Block Comment or Uncomment=注释块(&M)
Box Comment=注释区域(&X)
Stream Comment=注释组(&N)
Make Selection Uppercase=转为大写(&S)
Make Selection Lowercase=转为小写(&L)

# Search menu
Search=搜索(&S)
Find=查找(&F)
Find Next=查找下一个(&N)
Find Previous=查找上一个(&S)
Find in Files=在文件中查找(&I)
Replace=替换(&E)
Next Bookmark=下一个标记(&M)
Previous Bookmark=上一个标记(&V)
Toggle Bookmark=标记开关(&K)
Clear All Bookmarks=清空标记(&C)

# View menu
View=查看(&V)
Toggle current fold=折叠/展开(&C)
Toggle all folds=折叠/展开所有(&A)
Full Screen=全屏(&N)
Tool Bar=工具栏(&T)
Tab Bar=标签栏(&B)
Status Bar=状态栏(&S)
Whitespace=空格(&W)
End of Line=换行符(&E)
Indentation Guides=缩进标示(&I)
Line Numbers=行号(&L)
Margin=页边(&M)
Fold Margin=折叠页边(&F)
Output=输出窗口(&O)
Parameters=参数(&P)

# Tools menu
Tools=工具(&T)
Compile=编译(&C)
Build=创建(&B)
Go=执行(&G)
Stop Executing=中止执行(&S)
Next Message=下一条消息(&N)
Previous Message=上一条消息(&P)
Clear Output=清空输出(&O)
Switch Pane=切换窗格(&S)

# Options menu
Options=选项(&O)
Always On Top=总是置顶(&A)
Vertical Split=垂直切分(&S)
Line End Characters=换行符(&L)
CR + LF=CR &+ LF (Windows)
CR=&CR (MacOS)
LF=&LF (UNIX/Linux)
Convert Line End Characters=转换换行符(&C)
Change Indentation Settings=更改缩进设置(&T)
Use Monospaced Font=使用等宽字体(&M)
Open Local Options File=打开本地化设置文件(&L)
Open User Options File=打开用户设置文件(&U)
Open Global Options File=打开全局设置文件(&G)
Open Abbreviations File=打开缩写定义文件(&A)

# Language menu
Language=文本类型(&L)

# Buffers menu
Buffers=打开的文本(&B)
Previous=上一个(&P)
Next=下一个(&N)
Close All=全部关闭(&C)

# Help menu
Help=帮助(&H)
About Sc1=Sc1 相关(&S)
About SciTE=SciTE 相关(&C)

# Dialogs 对话框

# Generic dialog
OK=确定
Cancel=取消
Yes=是
No=否

# About dialog
# About SciTE=
Contributors:=

# Open, Save dialogs
Open File=打开文件
Save File=保存文件
Save File As=另存文件为
Export File As HTML=导出为 HTML 文件
Export File As RTF=导出为 RTF 文件
Save Current Session=保存当前会话
Custom Filter=自定义筛选

# Find in Files dialog
#Find in Files=在文件中查找
Find what:=查找内容(&N):
Files:=文件(&I):
#Find=

# Go To dialog
Go To=定位(&G)
Destination Line Number:=目标行:
Current line:=当前行:
Last line:=最末行:

# Indentation Settings dialog
Indentation Settings=缩进设置
Tab Size:=&Tab 宽度:
Indent Size:=缩进宽度(&I):
Use tabs:=使用 Ta&bs:

# Replace and Find dialogs
#Replace=
#Find=
#Find what:=
Replace with:=替换为(&P):
Match whole word only=全字匹配(&W)
Match case=匹分大小写(&C)
Regular expression=正则表达式(&E)
Wrap around=循环查找(&O)
Transform backslash expressions=转换反斜线符号(&B)
#Find Next=
Replace All=替换全部(&A)
Replace in Selection=在选取范围内替换(&S)
#Close=
Direction=查找方向
Reverse direction=反向查找
Up=向上(&U)
Down=向下(&D)

# Parameters dialog
Execute=执行
Set=设置(&S)

# Other UI strings
Untitled=未命名

# Properties used in global options
Text=Text
All Source=全部源代码
All Files (*.*)=所有文件(*.*)

# Messages 消息
# Messages may contain variables such as file names or search strings indicated
# by ^0 which are replaced by values before display. ^1, ^2, ... may be used in the future.
Can not find the string '^0'.=无法找到字符串 '^0' 。
Find string must not be empty for 'Replace All' command.="全部替换"时查找内容不能为空。
Selection must not be empty for 'Replace in Selection' command.="在选取范围内替换"时选择内容不能为空。
No replacements because string '^0' was not present.=没有找到字符串 '^0' ，未完成替换。
Could not open file '^0'.=无法打开 '^0' 。
Could not save file '^0'.=无法保存 '^0' 。
Save changes to '^0'?=要保存对文件 '^0' 所作的修改吗？
Save changes to (Untitled)?=要保存对文件(未命名)的修改吗？
The file '^0' has been modified. Should it be reloaded?=文件 '^0' 已经被修改，需要重新载入吗？
Bad file.=损坏文件。
Failed to create dialog box: ^0.=无法创建对话框: ^0 。
Can not start printer document.=无法打印。
URI '^0' not understood.=无法解析 URI '^0' 。
Invalid directory '^0'.=无效的目录 '^0' 。

# 1.42
Directory:=目录:
Wrap=折行(&W)
Hide=隐藏(&H)
Check if already open=检查文件是否已经打开

# 1.43
Find string must not be empty for 'Replace in Selection' command.="在选取范围内替换"时查找内容不能为空。
List Macros=列出所有宏
Run Current Macro=运行当前宏
Record Macro=录制宏
Stop Recording Macro=停止录制宏
SciTE Help=SciTE 文档(&S)
Sc1 Help=Sc1 文档
Edit Properties=编辑属性
Wrap Output=折行输出(&P)

# 1.44
Read-Only=只读(&R)
READ=读取

# 1.46
As TeX=为 TeX 文件(&T)
Export File As TeX=导出为 Tex 文件
Save a Copy=保存一份副本(&Y)

# 1.47
As LaTeX=为 LaTeX 文件(&L)
Export File As LaTeX=导出为 LaTeX 文件
Encoding=编码(&G)
8 Bit=8 Bit
UTF-8=UTF-8 (&U)

# 1.49
Save All=全部保存(&S)
Browse=浏览(&B)
Select a folder to search from=选择要搜索的文件夹
UTF-8 Cookie=UTF-8 Cookie

# 1.50
Insert Abbreviation=插入缩写(&I)
Abbreviation:=缩写(&A):
Insert=插入(&I)
Mark All=标记所有(&M)

# 1.51
In Selection=在选取范围
Paragraph=段落(&G)
Join=合并(&J)
Split=分割(&S)

# 1.52
Block comment variable '^0' is not defined in SciTE *.properties!=块的注释变量 '^0' 没有在 SciTE 的 *.properties 里定义！
Box comment variables '^0', '^1' and '^2' are not defined in SciTE *.properties!=区域的注释变量 '^0' ， '^1' 和 '^2' 没有在 SciTE 的 *.properties 里定义！
Stream comment variables '^0' and '^1' are not defined in SciTE *.properties!=组的注释变量 '^0' 和 '^1' 没有在 SciTE 的 *.properties 里定义！
The file '^0' has been modified outside SciTE. Should it be reloaded?=文件 '^0' 已经被 SciTE 以外的程序修改。需要重修载入吗？
As PDF=为 PDF 文件(&P)
Export File As PDF=导出为 PDF 文件

# 1.53
Version=版本
by=by

#1.54
Incremental Search=逐字搜索(&L)
Search for:=搜索:

#1.55
Could not save file '^0'. Save under a different name?=无法保存 '^0' 文件，是否更名另存？

#1.56
As XML=为 XML 文件(&X)
Export File As XML=导出为 XML 文件

#1.57
Destination Line:=目标行(&D):
Column:=列(&C):

#1.58
Replacements:=替换:
Open Files Here=在当前目录打开(&H)

#1.59

#1.60

#1.61
File '^0' is ^1 bytes long,\nlarger than the ^2 bytes limit set in the properties.\nDo you still want to open it?=文件 '^0' 的长度为 ^1 字节， \n超过了 properties 所限制的 ^2 字节， \n您仍要打开它吗？
Open Lua Startup Script=打开 Lua 启动脚本
All Files (*)=所有文件 (*)
Hidden Files (.*)=隐藏文件 (.*)

#1.62
Show hidden files=显示隐藏文件

#1.63
Replace in Buffers=在缓冲器中替换(&U)
Find string must not be empty for 'Replace in Buffers' command.="在缓冲器中替换"时查找内容不能为空。
Search only in this style:=仅以此样式搜索(&t):

#1.67
Duplicate=复写(&E)

#1.72
Convert=转换(&C)

#1.73
Code Page Property=系统内码(&C)
UTF-8 with BOM=UTF-8 BOM (&W)
Open Directory Options File=打开目录选项文件(&D)

#1.77
File '^0' is already open in another buffer.=文件 '^0' 已经在另一个缓冲器里打开了。

# 2.10
UTF-16 Big Endian=UTF-16 BE (&B)
UTF-16 Little Endian=UTF-16 LE (&L)

# 2.12
The file '^0' has been modified outside SciTE. Should it be saved?=文件 '^0' 已经被 SciTE 以外的程序修改。需要保存它吗?
Copy Path=复制路径(&H)
in=在
of=

# 2.20
Find:=查找(&N):
Replace:=替换(&P):

#2.21
Use tabs=使用 tabs
Case sensitive=大小写敏感(&V)

# 3.0.0
The file '^0' has not yet been loaded entirely, so it can not be saved right now. Please retry in a while.=文件 '^0' 还没完全加载结束，所以暂时无法保存。请待会再次尝试操作。

# 3.0.2
Opening '^0'=正在打开 '^0'
Saving '^0'=正在保存 '^0'
Opening ^0 files =正在打开文件 '^0'
Saving ^0 files =正在保存文件 '^0'

# 3.0.4
Job is currently executing. Wait until it finishes.=作业当前在执行中。请等待作业完成。

# Mac OS X 3.2.3
Hide SciTE=隐藏 SciTe
Hide Others=隐藏其它
Show All=显示全部
Quit SciTE=退出 SciTe
Open Recent=打开最近的
Revert to Saved=还原为已保存
Allow Access=允许访问
Use Selection for Find=在选取范围内查找
Enter Full Screen=进入全屏
Toolbar=工具栏
Open Abbreviations Options File=打开缩写选项文件

# Mac OS X 3.3.5
Spelling=拼写
No guesses for '^0'=无法确认 '^0'

# 3.3.8
Path '^0' is a directory so can not be opened.=路径 '^0' 是一个文件夹，所以不能打开。

# 3.4.5
Clean=清理(&E)

# 3.5.7
Selection Add Next=与下一个相同的选取值进行同时编辑(&D)
Selection Add Each=与全部相同的选取值进行同时编辑(&A)

# 3.7.1
File '^0' is ^1 bytes long, larger than 2GB which is the largest SciTE can open.=文件 '^0' 大小为 ^1 B，SciTE 无法打开大于 2GB 的文件。

# 3.7.5
Reverse Selected Lines=反向选取行
The file '^0' has been deleted.=文件 '^0' 已经被删除。
Select All Bookmarks=选取所有书签
